Skip to content
INTRICJSMINTRIC JSM Waterproofing and Painting Works — home

System family

Membrane & below-grade waterproofing

Sheet, torch-applied, and bentonite geotextile systems for foundations, lift pits, tanks, and podium decks — where water sits under head pressure and re-entry is expensive. Installed by our own crews, from surface preparation to protection board.

Systems in this family

  • Bentonite waterproofing pad

    Sodium-bentonite geotextile laid against blinding or fastened to the wall face; swells on contact with water to seal itself and minor concrete defects. Laps 100 mm.

  • APP membranes (torch-on applied)

    Modified-bitumen sheet torch-applied to a primed deck. Requires a hot-works permit and a dry substrate; unbeatable on large uninterrupted decks.

  • Self-swelling water stop

    Hydrophilic profile nailed into cold joints and around penetrations before the pour. The detail that decides whether a basement leaks, not the membrane area.

Typed spec — below-grade wallSECTION · N.T.S.
  1. 01Protection boardbefore backfill
  2. 02Voltex bentonite geotextilelaps 100 mm, fastened
  3. 03RX-101 waterstopcold joints, penetrations
  4. 04Structural wallconcrete · CHB
  5. 05Blinding & compacted subgradeprepared
Systems
Bentonite pad · Voltex / RX-101 · Voltite sheet · APP torch-on membranes · self-swelling waterstop
Substrates
Structural and blinding concrete, CHB, shotcrete
Typical warranty
5–10 years — confirmed per system at quotation
Brands applied
CETCO (Voltex, RX-101), Voltite, Bitumode Delta-P, SIKA

Send us the scope.

Attach drawings or a BOQ to a quotation request, or book a date for a site inspection. Both paths reach the same engineers.

Book inspectionRequest quotation